Adjustable Chokes for production and wellhead choke service
Contact Us

Choke Category

Adjustable Chokes

Field-Adjustable Flow Control.

Our adjustable chokes give crews a variable flow path when pressure, rate, or production conditions need to be tuned in the field.

Compare Adjustable Models

Model Overview

Adjustable Choke
Models.

Compare each option by pressure rating, connection style, orifice range, trim, and service requirements.

Threaded Adjustable CP29 / CP30 choke product image CP29 / CP30 Field-repairable threaded assemblies for simple 2K to 3K service, with practical trim options and crew-friendly upkeep. 2,000 to 3,000 PSI 3/4 in and 1 in View Product Threaded Adjustable CH63 choke product image CH63 Threaded adjustable choke coverage for 3K larger-orifice service and 5K 2 inch line-pipe service. 3,000 and 5,000 PSI 3/4 in, 1 in, or 2 in View Product Threaded Adjustable CN60 choke product image CN60 Threaded 5K adjustable choke for standard field service where field adjustment and renewable seat support matter. 5,000 PSI 3/4 in and 1 in View Product 116-Style Adjustable CFT116A choke product image CFT116A Familiar 116-style adjustable choke for 5K service, built around economical field repair and common field fit-up. 5,000 PSI 3/4 in and 1 in View Product Flanged Adjustable CN62 choke product image CN62 Flanged adjustable choke coverage for ANSI RF and 2 1/16 in service up to 5K, with alloy or full stainless options. 275 to 5,000 PSI 3/4 in and 1 in View Product High-Pressure Adjustable CJWA choke product image CJWA High-pressure flanged adjustable choke service up to 15K, with standard or H2S service and SS or SS/TC trim options. 5,000 to 15,000 PSI 3/4 in and 1 in View Product Large-Orifice Adjustable CH22A choke product image CH22A Large-orifice adjustable choke for higher-capacity flow paths where the job needs more restriction range. 2,000 to 15,000 PSI 1 in, 1 3/4 in, and 2 in View Product Heater Choke CEHC65 / CEHC78 choke product image CEHC65 / CEHC78 Economy heater choke for socket weld or FNPT fit-up, with threaded bonnet, O-ring seal, and grease fitting support. 6,500 and 7,800 PSI 1/2 in, 3/4 in, and 1 in View Product

Variable Control

Best Fit Summary

Use adjustable chokes when the restriction may need to change after installation. Start with working pressure and connections, then narrow the model by orifice range, trim, service class, and parts support.

  • Best When Pressure, rate, or production behavior may need field adjustment.
  • Narrow By Pressure class, end connections, orifice range, trim, and service class.
  • Support With Seats, stems, bonnet kits, trim packages, and related choke parts.

Common Questions

Adjustable Chokes FAQs

Use these answers to narrow the right product model, document, or support request before you contact the Cactus Flow team.

What is an adjustable choke?

An adjustable choke is a production or wellhead choke valve used when operators need to change the flow restriction during service. It is selected when pressure, rate, or field conditions may change and manual adjustment is preferred over a fixed bean.

When should adjustable chokes be used?

Adjustable chokes are useful when the job requires field tuning, test control, or changing restriction without swapping to a fixed orifice. The final model depends on pressure class, connection, orifice, trim, and service environment.

What details narrow adjustable choke selection?

Start with working pressure, end connection, orifice range, trim material, and service class. If replacing existing equipment, model numbers, photos, dimensions, and field constraints can help Cactus Flow identify the right adjustable model.

Back To Choke Valves Positive Chokes Target Chokes Disc Chokes